J1708 Transportation Products
FSD has developed a line of standard J1708/J1587 monitoring controllers to make developing electronic systems for vehicles easier. They report communication packets sent through the J1708/J1587 bus.
Foard Systems Design, Inc.
Vehicle Systems
 |
J1708 Bridge Controller |
In situations where more than one J1708/J1587 bus reports data, the FSD J1708 packet bridges allow access to data from one J1708 bus by devices on the other bus. It is highly flexible and allows the system designer to control the packets mirrored through the bridge. The bridge unit can be configured to to bi-directional, with independent MIDs and PIDs specified for each direction. Bridge options are configured using a provided Windows based program, than loaded into FLASH within the bridge. |
|
|
J1708 Bridge with Logging |
The addition of logging capabilities to the J1708 Bridge Controller provides data access to the vehicle owner / operator and provides a valuable diagnostic tool for the J1708 system designer. Logging provides a tool to diagnose reported malfunctions which can be difficult to recreate in the laboratory. This is a standard product solution that can be easily added to a system. Logging can be easily retrofitted into an existing J1708 system or temporarily added for diagnostic purposes. |
|
|
J1708 Tester | The J1708 Tester is a system for monitoring, decoding, logging, testing, and simulating J1708 / J1587 packet traffic. It includes Windows based software and an intelligent J1708 Tester pod to interface to the J1708 bus. The tester is a full J1708 interface implementation, including packet collision avoidance, detection, and retransmission. |